[Tizen Application-dev] [Dev] Unable to use Crosswalk remote debugging with "Tizen on Yocto"

Leon Anavi leon.anavi at konsulko.com
Wed May 27 13:09:05 GMT 2015


Hi Peter,

Thank you for the provided help. The issue was solved after updating 
Crosswalk to version 11.40.277.0. Now the remote debugger works as expected.

Thanks,
Leon

On 26.05.2015 11:54, Wang, Peter H wrote:
> Sounds weird, if you can see the page including words " Inspectable Apps", then the connection of remote debugging must works well.
> There are only two ways I can figure out right now to find some clue (sorry, I don't have the device you mentioned so cannot debug):
>
> (1) Make sure only one web app is living and try again.
>    For some versions of Tizen, Crosswalk is working in "single process model", you can only enable remote debugging only for one App in the same time.
>
> (2) Press F12 in the page which is including " Inspectable Apps" to toggle devtools of Chrome, click "console" to see if there are some error messages.
> Hope this can help.
>
> -----Original Message-----
> From: Leon Anavi [mailto:leon.anavi at konsulko.com]
> Sent: Tuesday, May 26, 2015 4:21 PM
> To: Wang, Peter H; dev at lists.tizen.org; application-dev at lists.tizen.org
> Subject: Re: [Dev] Unable to use Crosswalk remote debugging with "Tizen on Yocto"
>
> Hi,
>
> On 26.05.2015 05:07, Wang, Peter H wrote:
>>   From the description in BTY-109, seems, it's not remote debugging problem because you can see the first page showing an empty "Inspectable Apps".
>> Usually, an empty list of "Inspectable Apps" means there is not web page launched by Crosswalk.
>> Are sure the app "SM31mV8fq9.go"is packaged as App of Crosswalk rather than Tizen WRT?
> Yes, application SM31mV8fq9.go is shipped in Tizen:Common with package wrt-widgets. Crosswalk is the web runtime in Tizen:Common and I am able to run remote debugging of SM31mV8fq9.go on Intel NUC with GBS build of Tizen:Common. I believe the issue that I have reported is caused by the different version of Crosswalk (and may be some of the other packages) in "Tizen on Yocto". I will update it and I will try the remote debugger again.
>
> Thanks,
> Leon
>
>> -----Original Message-----
>> From: Dev [mailto:dev-bounces at lists.tizen.org] On Behalf Of Leon Anavi
>> Sent: Monday, May 25, 2015 11:02 PM
>> To: dev at lists.tizen.org; application-dev at lists.tizen.org
>> Subject: [Dev] Unable to use Crosswalk remote debugging with "Tizen on Yocto"
>>
>> Hi,
>>
>> I am unable to remotely debug web applications on Tizen:Common built with Yocto. The list of inspectable apps in Chrome on my desktop remains empty after enabling remote debugging for crosswalk on port 9222 of the Tizen device and launching the web application in debug mode.
>> I have been following these instructions to enable remote debugging in
>> Crosswalk:
>> https://crosswalk-project.org/documentation/getting_started/remote_deb
>> ugging.html
>>
>> The same procedure works fine on Tizen:Common image built with GBS. I guess that "Tizen on Yocto" uses older version of Crosswalk than the one in the GBS builds. For more details please visit:
>> https://bugs.tizen.org/jira/browse/BTY-109
>>
>> Have you seen similar issue? Is it fixed and if yes in which version?
>>
>> Best regards,
>> Leon
>>
>> --
>> Leon Anavi
>> Software Engineer
>> Mob : +359 88 527 7901
>> konsulko.com
>>
>> _______________________________________________
>> Dev mailing list
>> Dev at lists.tizen.org
>> https://lists.tizen.org/listinfo/dev
> --
> Leon Anavi
> Software Engineer
> Mob : +359 88 527 7901
> konsulko.com
>

-- 
Leon Anavi
Software Engineer
Mob : +359 88 527 7901
konsulko.com



More information about the Application-dev mailing list