[Dev] Finished the multi-user BT phase1 source code and the related test report

Zheng, Wu wu.zheng at intel.com
Thu Oct 16 08:04:42 GMT 2014


Hi Corentin,

In fact, I don't use "app" user to test it.

As what you said, I used a specific user to test it.
Therefore, The test result matches your requirements.

Whatever, I will try it on Tizen common again.

Best regards
Zheng Wu

-----Original Message-----
From: Corentin Lecouvey [mailto:corentin.lecouvey at open.eurogiciel.org] 
Sent: Thursday, October 16, 2014 3:56 PM
To: Zheng, Wu; dev at lists.tizen.org
Cc: Le Foll, Dominique; Xu, Martin; Jia, Pei P; Liu, Bingwei
Subject: Re: Finished the multi-user BT phase1 source code and the related test report

Hi Zheng Wu,

I can not take much time to read and test your code but I see a problem.
bluetooth-service daemon is still run by 'app' user which doesn't exist anymore.

It would be preferably run by a specific user.
For example, 'bluetooth' user exists and it is not used in Tizen3...

Please test your code on Tizen Common.

Best regards,
Corentin


On 10/16/2014 09:33 AM, Zheng, Wu wrote:
> Hi,
>
> According to https://wiki.tizen.org/wiki/Multi-user_Bluetooth, the multi-user BT phase1 source code have been finished.
>
> The related multi-user BT phase1 solution have been checked. (Please search the old multi-user BT phase1 solution in the mail list).
>
> The related source code are in https://review.tizen.org/gerrit/#/c/28783/
>                         https://review.tizen.org/gerrit/#/c/28786/
>
> I have tested the source code. It matches the requirements of multi-user BT phase1.
>
> Please check the following BT test results.
>
> a. UserA and UserB is in IVI. DeviceA is the remote BT devices.
>
> 1. UserA paired with DeviceA.
> UserA can audio connect with DeviceA.
> UserA can hid connect with DeviceA.
> UserA can socket connect with DeviceA.
> UserA can send files to DeviceA.
> ......
>
> 2. At the same time, userB can't audio connect with DeviceA.
> UserB can't hid connect with DeviceA.
> UserB can't socket connect with DeviceA.
> UserB can't send files to DeviceA.
> ......
>
> 3. UserA can unpaire with DeviceA.
> UserB can't unpaire with DeviceA.
>
> 4. After UserA unpaired with DeviceA, userB can pair with DeviceA.
>
> 5. After userB pair with DeviceA, UserB can connect with DeviceA(including audio, hid, socket and so on).
> At the same time, userA can't connect with DeviceA.
>
> If there are DeviceA and DeviceB and so on, please refer to the above cases.
>
> After merging the related source code, I will add the test report to the wiki.
> https://wiki.tizen.org/wiki/NTB_Architecture
>
> Best Regards
> Zheng Wu



More information about the Dev mailing list