[Dev] Tizen Bootup No Display Issue

Anoop Babu babu.anoop at gmail.com
Thu Sep 18 14:09:37 GMT 2014


Dear Kevin,

Thank you the valuable inputs. I have gone ahead and created recipe for
3.14.
Attached is the .bb file and inc file for your reference.
SRCReV i have used the latest commit id.
I have not understood the statements "add kernel options we set in our
defconfig"  and "add our patches". Request you to throw some light on this.
Do I have to do any additional code modifications?

Best regards
Anoop


On Wed, Sep 17, 2014 at 8:40 PM, Kévin THIERRY <
kevin.thierry at open.eurogiciel.org> wrote:

> Hi Anoop,
>
> I don't know what the issue is but I'm seeing another problem: you don't
> have smack enabled in your kernel. Tizen isn't made to be run without smack
> since it's part of its specificity. To get smack I see two options:
> * backport smack support to kernel 3.10 (backport smack support in kernel
> 3.14 and our patches)
> * create a recipe for kernel 3.14 for your board (and add our patches)
> (Note that in both case you will also need to add kernel options we set in
> our defconfig.)
>
> I don't know which solution is the easiest, but the second solution is
> probably the best one since it will get you in sync with Tizen kernel.
> Maybe you can first ask the maintainers of meta-fsl-arm if they plan on
> supporting kernel 3.14. If you want to create the recipe for kernel 3.14
> you can use the recipe for kernel 3.10.17 as an example (in meta-fsl-arm).
>
> Best regards,
> Kevin
>
> On 17/09/2014 16:22, Anoop Babu wrote:
>
>> Dear kevin,
>>
>> From my recent search no support for 3.14 kernel is available for
>> imx6qsabreauto.
>>
>> Inline image 3
>>
>>
>> Inline image 1
>>
>>
>> Meanwhile I have taken the bootup log. Can you give me your inputs on
>> what might have caused the no output at display unit.
>>
>> Best regards
>>   Anoop
>>
>> U-Boot 2014.07 (Aug 08 2014 - 17:39:25)
>>
>> CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
>> Reset cause: POR
>> Board: MX6Q-Sabreauto revA
>> I2C:   ready
>> DRAM:  2 GiB
>> MMC:   FSL_SDHC: 0
>> In:    serial
>> Out:   serial
>> Err:   serial
>> Net:   FEC [PRIME]
>> Hit any key to stop autoboot:  1 |�
>>
>> U-Boot 2014.07 (Aug 08 2014 - 17:39:25)
>>
>> CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
>> Reset cause: POR
>> Board: MX6Q-Sabreauto revA
>> I2C:   ready
>> DRAM:  2 GiB
>> MMC:   FSL_SDHC: 0
>> In:    serial
>> Out:   serial
>> Err:   serial
>> Net:   FEC [PRIME]
>> Hit any key to stop autoboot:  0
>> switch to partitions #0, OK
>> mmc0 is current device
>> reading boot.scr
>> ** Unable to read file boot.scr **
>> reading zImage
>> 5264680 bytes read in 245 ms (20.5 MiB/s)
>> Booting from mmc ...
>> reading imx6q-sabreauto.dtb
>> 47128 bytes read in 19 ms (2.4 MiB/s)
>> Kernel image @ 0x12000000 [ 0x000000 - 0x505528 ]
>> ## Flattened Device Tree blob at 18000000
>>    Booting using the fdt blob at 0x18000000
>>    Using Device Tree in place at 18000000, end 1800e817
>>
>> Starting kernel ...
>>
>> Booting Linux on physical CPU 0x0
>> Linux version 3.10.17-1.0.0_ga+g2a69800 (sfm at D0938-UBUNTU) (gcc version
>> 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Aug 8 17:36:39 IST 2014
>> CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
>> CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
>> Machine: Freescale i.MX6 Quad/DualLite (Device Tree), model: Freescale
>> i.MX6 Quad SABRE Automotive Board
>> cma: CMA: reserved 320 MiB at 6a000000
>> Memory policy: ECC disabled, Data cache writealloc
>> PERCPU: Embedded 8 pages/cpu @81d17000 s8896 r8192 d15680 u32768
>> Built 1 zonelists in Zone order, mobility grouping on.  Total pages:
>> 520720
>> Kernel command line: console=ttymxc3,115200 root=/dev/mmcblk0p2 rootwait
>> rw video=mxcfb0:dev=hdmi,1280x720M at 60,if=RGB24
>> PID hash table entries: 4096 (order: 2, 16384 bytes)
>> Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
>> Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
>> Memory: 2048MB = 2048MB total
>> Memory: 1737292k/1737292k available, 359860k reserved, 270336K highmem
>> Virtual kernel memory layout:
>>     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
>>     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
>>     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
>>     lowmem  : 0x80000000 - 0xef800000   (1784 MB)
>>     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
>>     modules : 0x7f000000 - 0x7fe00000   (  14 MB)
>>       .text : 0x80008000 - 0x80bfcccc   (12244 kB)
>>       .init : 0x80bfd000 - 0x80c412c0   ( 273 kB)
>>       .data : 0x80c42000 - 0x80c92be0   ( 323 kB)
>>        .bss : 0x80c92be0 - 0x80cfbd64   ( 421 kB)
>> SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>> Preemptible hierarchical RCU implementation.
>> NR_IRQS:16 nr_irqs:16 16
>> L310 cache controller enabled
>> l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x32070000, Cache size:
>> 1048576 B
>> sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
>> CPU identified as i.MX6Q, silicon rev 1.2
>> Console: colour dummy device 80x30
>> Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
>> pid_max: default: 32768 minimum: 301
>> Mount-cache hash table entries: 512
>> CPU: Testing write buffer coherency: ok
>> CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
>> Setting up static identity map for 0x80629848 - 0x806298a0
>> CPU1: Booted secondary processor
>> CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
>> CPU2: Booted secondary processor
>> CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
>> CPU3: Booted secondary processor
>> CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
>> Brought up 4 CPUs
>> SMP: Total of 4 processors activated (6324.22 BogoMIPS).
>> CPU: All CPU(s) started in SVC mode.
>> devtmpfs: initialized
>> pinctrl core: initialized pinctrl subsystem
>> regulator-dummy: no parameters
>> NET: Registered protocol family 16
>> DMA: preallocated 256 KiB pool for atomic coherent allocations
>> Use WDOG1 as reset source
>> syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
>> vdd1p1: 800 <--> 1375 mV at 1125 mV
>> vdd3p0: 2800 <--> 3150 mV at 3000 mV
>> vdd2p5: 2000 <--> 2750 mV at 2425 mV
>> cpu: 725 <--> 1450 mV at 1150 mV
>> vddpu: 725 <--> 1450 mV at 1150 mV
>> vddsoc: 725 <--> 1450 mV at 1175 mV
>> syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered
>> syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
>> hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint
>> registers.
>> hw-breakpoint: maximum watchpoint size is 4 bytes.
>> imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
>> bio: create slab <bio-0> at 0
>> mxs-dma 110000.dma-apbh: initialized
>> cs42888_supply: 3300 mV
>> vio1: 3300 mV
>> vio2: 3300 mV
>> vd: 3300 mV
>> va: 5000 mV
>> platform usb_h1_vbus.32: Driver reg-fixed-voltage requests probe deferral
>> platform usb_otg_vbus.33: Driver reg-fixed-voltage requests probe deferral
>> 3P3V: 3300 mV
>> i2c-core: driver [max17135] using legacy suspend method
>> i2c-core: driver [max17135] using legacy resume method
>> SCSI subsystem initialized
>> usbcore: registered new interface driver usbfs
>> usbcore: registered new interface driver hub
>> usbcore: registered new device driver usb
>> i2c i2c-0: IMX I2C adapter registered
>> i2c i2c-1: IMX I2C adapter registered
>> Linux video capture interface: v2.00
>> pps_core: LinuxPPS API ver. 1 registered
>> pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
>> giometti at linux.it <mailto:giometti at linux.it>>
>>
>> PTP clock support registered
>> imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
>> imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
>> MIPI CSI2 driver module loaded
>> Advanced Linux Sound Architecture Driver Initialized.
>> cfg80211: Calling CRDA to update world regulatory domain
>> Switching to clocksource mxc_timer1
>> NET: Registered protocol family 2
>> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>> TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>> TCP: Hash tables configured (established 16384 bind 16384)
>> TCP: reno registered
>> UDP hash table entries: 1024 (order: 3, 32768 bytes)
>> UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>> NET: Registered protocol family 1
>> RPC: Registered named UNIX socket transport module.
>> RPC: Registered udp transport module.
>> RPC: Registered tcp transport module.
>> RPC: Registered tcp NFSv4.1 backchannel transport module.
>> hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters
>> available
>> pureg-dummy: no parameters
>> imx6_busfreq busfreq.15: DDR medium rate not supported.
>> Bus freq driver module loaded
>> bounce pool size: 64 pages
>> VFS: Disk quotas dquot_6.5.2
>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>> NFS: Registering the id_resolver key type
>> Key type id_resolver registered
>> Key type id_legacy registered
>> jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
>> fuse init (API version 7.22)
>> msgmni has been set to 3505
>> io scheduler noop registered
>> io scheduler deadline registered
>> io scheduler cfq registered (default)
>> MIPI DSI driver module loaded
>> mxc_sdc_fb fb.22: register mxc display driver hdmi
>> mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1
>> fbcvt: 1280x720 at 60: CVT Name - .921M9
>> imx-ipuv3 2400000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5),
>> 5F(6,7)
>> Console: switching to colour frame buffer device 160x45
>> mxc_sdc_fb fb.23: register mxc display driver hdmi
>> mxc_hdmi 20e0000.hdmi_video: Error only one HDMI output support now!
>> mxc_sdc_fb fb.23: NO mxc display driver found!
>> mxc_sdc_fb fb.24: register mxc display driver lcd
>> mxc_sdc_fb fb.24: NO mxc display driver found!
>> mxc_sdc_fb fb.25: register mxc display driver ldb
>> imx-sdma 20ec000.sdma: no iram assigned, using external mem
>> imx-sdma 20ec000.sdma: loaded firmware 1.1
>> imx-sdma 20ec000.sdma: initialized
>> mxc_hdmi 20e0000.hdmi_video: Read EDID again
>> pfuze100-regulator 0-0008: Full lay: 1, Metal lay: 2
>> mxc_hdmi 20e0000.hdmi_video: No modes read from edid
>> mxc_hdmi 20e0000.hdmi_video: create default modelist
>> pfuze100-regulator 0-0008: FAB: 0, FIN: 0
>> pfuze100-regulator 0-0008: pfuze100 found.
>> SW1AB: 300 <--> 1875 mV at 1375 mV
>> SW1C: 300 <--> 1875 mV at 1375 mV
>> SW2: 800 <--> 3300 mV at 3000 mV
>> SW3A: 400 <--> 1975 mV at 1500 mV
>> SW3B: 400 <--> 1975 mV at 1500 mV
>> SW4: 800 <--> 1975 mV at 1800 mV
>> SWBST: 5000 <--> 5150 mV at 5000 mV
>> VSNVS: 1000 <--> 3000 mV at 3000 mV
>> VREFDDR: 750 mV
>> VGEN1: 800 <--> 1550 mV at 800 mV
>> VGEN2: 800 <--> 1550 mV at 1500 mV
>> VGEN3: 1800 <--> 3300 mV at 1800 mV
>> VGEN4: 1800 <--> 3300 mV at 1800 mV
>> VGEN5: 1800 <--> 3300 mV at 2500 mV
>> VGEN6: 1800 <--> 3300 mV at 2800 mV
>> Serial: IMX driver
>> 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
>> 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 61) is a IMX
>> console [ttymxc3] enabled
>> serial: Freescale lpuart driver
>> [drm] Initialized drm 1.1.0 20060810
>> [drm] Initialized vivante 1.0.0 20120216 on minor 0
>> brd: module loaded
>> loop: module loaded
>> si476x-core 0-0063: Using default platform data.
>> si476x-core 0-0063: No IRQ number specified, will use polling
>> si476x-core 0-0063: Error while sending command 0x11
>> si476x-core 0-0063: The device in inconsistent power state
>> Wait for CR ACK error!
>> sata phy RX_PLL is stable!
>> ahci: SSS flag set, parallel bus scan disabled
>> ahci ahci: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
>> ahci ahci: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
>> scsi0 : ahci_platform
>> ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 71
>> CAN device driver interface
>> flexcan 2094000.can: device registered (reg_base=f01d8000, irq=143)
>> libphy: fec_enet_mii_bus: probed
>> fec 2188000.ethernet eth0: registered PHC device 0
>> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> usbcore: registered new interface driver usb-storage
>> imx_usb 2184000.usb: Can't register ci_hdrc platform device, err=-517
>> platform 2184000.usb: Driver imx_usb requests probe deferral
>> imx_usb 2184200.usb: Can't register ci_hdrc platform device, err=-517
>> platform 2184200.usb: Driver imx_usb requests probe deferral
>> mousedev: PS/2 mouse device common for all mice
>> egalax_ts 0-0004: Failed to read firmware version
>> egalax_ts: probe of 0-0004 failed with error -5
>> i2c-core: driver [isl29023] using legacy suspend method
>> i2c-core: driver [isl29023] using legacy resume method
>> snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as
>> rtc0
>> i2c /dev entries driver
>> mxc_v4l2_output v4l2_out.40: V4L2 device registered as video16
>> mxc_v4l2_output v4l2_out.40: V4L2 device registered as video17
>> mxc_v4l2_output v4l2_out.40: V4L2 device registered as video18
>> mxc_v4l2_output v4l2_out.40: V4L2 device registered as video19
>> mag3110 1-000e: check mag3110 chip ID
>> mag3110 1-000e: read chip ID 0xfffffffb is not equal to 0xc4!
>> mag3110: probe of 1-000e failed with error -22
>> i2c-core: driver [mag3110] using legacy suspend method
>> i2c-core: driver [mag3110] using legacy resume method
>> mma8451 1-001c: read chip ID 0x1 is not equal to 0x1a or 0x2a!
>> mma8451: probe of 1-001c failed with error -22
>> imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s
>> (nowayout=0)
>> cpuidle: using governor ladder
>> cpuidle: using governor menu
>> sdhci: Secure Digital Host Controller Interface driver
>> sdhci: Copyright(c) Pierre Ossman
>> sdhci-pltfm: SDHCI platform and OF driver helper
>> mmc0: no vqmmc regulator found
>> mmc0: no vmmc regulator found
>> mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
>> mmc1: no vqmmc regulator found
>> mmc1: no vmmc regulator found
>> mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
>> mmc1: new high speed SDHC card at address aaaa
>> mmcblk0: mmc1:aaaa SU08G 7.40 GiB
>>  mmcblk0: p1 p2
>> ata1: SATA link down (SStatus 0 SControl 300)
>> Galcore version 4.6.9.9754
>> mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
>> mxc_asrc 2034000.asrc: mxc_asrc registered
>> mxc_vpu 2040000.vpu: VPU initialized
>> caam 2100000.caam: device ID = 0x0a16010000000000 (Era -524)
>> caam 2100000.caam: job rings = 2, qi = 0
>> caam 2100000.caam: authenc-hmac-md5-cbc-aes-caam
>> caam 2100000.caam: authencesn-hmac-md5-cbc-aes-caam
>> caam 2100000.caam: authenc-hmac-sha1-cbc-aes-caam
>> caam 2100000.caam: authencesn-hmac-sha1-cbc-aes-caam
>> caam 2100000.caam: authenc-hmac-sha224-cbc-aes-caam
>> caam 2100000.caam: authencesn-hmac-sha224-cbc-aes-caam
>> caam 2100000.caam: authenc-hmac-sha256-cbc-aes-caam
>> caam 2100000.caam: authencesn-hmac-sha256-cbc-aes-caam
>> caam 2100000.caam: authenc-hmac-md5-cbc-des3_ede-caam
>> caam 2100000.caam: authencesn-hmac-md5-cbc-des3_ede-caam
>> caam 2100000.caam: authenc-hmac-sha1-cbc-des3_ede-caam
>> caam 2100000.caam: authencesn-hmac-sha1-cbc-des3_ede-caam
>> caam 2100000.caam: authenc-hmac-sha224-cbc-des3_ede-caam
>> caam 2100000.caam: authencesn-hmac-sha224-cbc-des3_ede-caam
>> caam 2100000.caam: authenc-hmac-sha256-cbc-des3_ede-caam
>> caam 2100000.caam: authencesn-hmac-sha256-cbc-des3_ede-caam
>> caam 2100000.caam: authenc-hmac-md5-cbc-des-caam
>> caam 2100000.caam: authencesn-hmac-md5-cbc-des-caam
>> caam 2100000.caam: authenc-hmac-sha1-cbc-des-caam
>> caam 2100000.caam: authencesn-hmac-sha1-cbc-des-caam
>> caam 2100000.caam: authenc-hmac-sha224-cbc-des-caam
>> caam 2100000.caam: authencesn-hmac-sha224-cbc-des-caam
>> caam 2100000.caam: authenc-hmac-sha256-cbc-des-caam
>> caam 2100000.caam: authencesn-hmac-sha256-cbc-des-caam
>> caam 2100000.caam: ecb-des-caam
>> caam 2100000.caam: ecb-arc4-caam
>> caam 2100000.caam: ecb-aes-caam
>> caam 2100000.caam: ctr-aes-caam
>> caam 2100000.caam: cbc-aes-caam
>> caam 2100000.caam: ecb-des3-caam
>> caam 2100000.caam: cbc-3des-caam
>> caam 2100000.caam: cbc-des-caam
>> caam 2100000.caam: fsl,sec-v4.0 algorithms registered in /proc/crypto
>> platform 2101000.jr0: registering rng-caam
>> platform caam_sm: caam_sm_test: 8-byte key test match OK
>> platform caam_sm: caam_sm_test: 16-byte key test match OK
>> platform caam_sm: caam_sm_test: 32-byte key test match OK
>> platform caam_secvio.41: security violation service handlers armed
>> usbcore: registered new interface driver usbhid
>> usbhid: USB HID core driver
>> cs42888 0-0048: Device with ID register fffffffb is not a CS42888
>> i2c-core: driver [cs42888] using legacy suspend method
>> i2c-core: driver [cs42888] using legacy resume method
>> imx-cs42888 sound-cs42888.35: failed to find codec platform device
>> imx-cs42888: probe of sound-cs42888.35 failed with error -22
>> imx-spdif sound-spdif.38:  dir-hifi <-> 2004000.spdif mapping ok
>> imx-audio-hdmi sound-hdmi.37:  hdmi-hifi <-> hdmi_audio.16 mapping ok
>> imx-tuner-si476x sound-fm.36: failed to find FM platform device
>> imx-tuner-si476x: probe of sound-fm.36 failed with error -22
>> TCP: cubic registered
>> NET: Registered protocol family 10
>> sit: IPv6 over IPv4 tunneling driver
>> NET: Registered protocol family 17
>> can: controller area network core (rev 20120528 abi 9)
>> NET: Registered protocol family 29
>> can: raw protocol (rev 20120528)
>> can: broadcast manager protocol (rev 20120528 t)
>> can: netlink gateway (rev 20130117) max_hops=1
>> 8021q: 802.1Q VLAN Support v1.8
>> Key type dns_resolver registered
>> VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
>> VGEN2: disabling
>> usb_h1_vbus: 5000 mV
>> usb_otg_vbus: 5000 mV
>> ci_hdrc ci_hdrc.0: EHCI Host Controller
>> ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
>> ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
>> hub 1-0:1.0: USB hub found
>> hub 1-0:1.0: 1 port detected
>> ci_hdrc ci_hdrc.1: doesn't support gadget
>> ci_hdrc ci_hdrc.1: EHCI Host Controller
>> ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
>> ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
>> hub 2-0:1.0: USB hub found
>> hub 2-0:1.0: 1 port detected
>> input: gpio-keys.19 as /devices/soc0/gpio-keys.19/input/input0
>> snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01
>> UTC (1)
>> ALSA device list:
>>   #0: imx-spdif
>>   #1: imx-hdmi-soc
>> kjournald starting.  Commit interval 5 seconds
>> EXT3-fs (mmcblk0p2): using internal journal
>> EXT3-fs (mmcblk0p2): recovery complete
>> EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
>> VFS: Mounted root (ext3 filesystem) on device 179:2.
>> devtmpfs: mounted
>> Freeing unused kernel memory: 272K (80bfd000 - 80c41000)
>> sh: cannot set terminal process group (-1): Inappropriate ioctl for device
>> sh: no job control in this shell
>> sh-4.3#
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tizen.org/pipermail/dev/attachments/20140918/39151db4/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: linux-imx.inc
Type: application/octet-stream
Size: 1366 bytes
Desc: not available
URL: <http://lists.tizen.org/pipermail/dev/attachments/20140918/39151db4/attachment-0002.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: linux-imx_3.14.14.bb
Type: application/octet-stream
Size: 732 bytes
Desc: not available
URL: <http://lists.tizen.org/pipermail/dev/attachments/20140918/39151db4/attachment-0003.obj>


More information about the Dev mailing list