[Tizen General] Pandaboard ES stuck at Menu Screen

Akhil Panayamparambil akhil.panayamparamb at nestgroup.net
Fri Dec 5 07:24:01 GMT 2014


Leon,

        Thanks a lot for your support. I shall try with below mentioned rfs and let you know.

-----Original Message-----
From: Leon Anavi [mailto:leon at anavi.org]
Sent: Thursday, December 04, 2014 6:45 PM
To: Akhil Panayamparambil
Cc: VanCutsem, Geoffroy; general at lists.tizen.org
Subject: RE: [Tizen General] Pandaboard ES stuck at Menu Screen

Hi Akhil,

On 2014-12-04 14:50, Akhil Panayamparambil wrote:
> Can you please direct me from where I could find the images for
> Pandaboard ES Tizen 3.0?

Pandaboard ES has ARMv7 compatible CPU which means that you can use the images available here:
http://download.tizen.org/snapshots/tizen/common/latest/images/

Keep in my mind that some efforts will be needed to get any of these images running on the board.

Tizen:Common works on other ARMv7 boards such as A20-OLinuXino, Radxa Rock, and UDROID-U3. Recently I got it working on Radxa Rock and I have describe the porting process at my blog (when I have time I will transfer the info to Tizen wiki too):
https://www.anavi.org/article/168/

> Or is it like we have to port it
> from scratch with GBS and MIC ? And thank you for the fast and prompt
> reply you guys gave me.

It is also possible to build rpms of Tizen:Common or any other Tizen 3 profiles locally with GBS and to create an image. If you want to do it please read carefully all articles related to following page:
https://source.tizen.org/documentation/developer-guide/all-one-instructions/creating-tizen-images-scratch-one-page

Building Tizen from scratch requires a powerful hardware. Based on personal experience it is recommended to build it on personal computer with Intel i7 CPU and at least 8GB RAM. Otherwise the build process would require too much time.

Best regards,
Leon

>
>
> -----Original Message-----
> From: VanCutsem, Geoffroy [mailto:geoffroy.vancutsem at intel.com]
> Sent: Thursday, December 04, 2014 5:32 PM
> To: Leon Anavi; Akhil Panayamparambil
> Cc: general at lists.tizen.org
> Subject: RE: [Tizen General] Pandaboard ES stuck at Menu Screen
>
> I would second Leon's advice here to move to Tizen 3 (e.g. Tizen
> Common).
>
> You may nevertheless be interested in an earlier versoin of Tizen 2
> (alpha ARM release) that was done for the Panda board (back in May
> 2013):
> https://wiki.tizen.org/wiki/IVI/IVI_May_4,_2013_2.0_Alpha_ARM_release
>
> Geoffroy
>
>
>
>> -----Original Message-----
>> From: General [mailto:general-bounces at lists.tizen.org] On Behalf Of
>> Leon Anavi
>> Sent: Thursday, December 04, 2014 12:54 PM
>> To: Akhil Panayamparambil
>> Cc: general at lists.tizen.org
>> Subject: Re: [Tizen General] Pandaboard ES stuck at Menu Screen
>>
>> Hi Akhil,
>>
>> I am the one who created the article at the Tizen Wiki based on the
>> following document from Samsung Electronics:
>> https://wiki.tizen.org/w/images/f/f2/Tizen_IVI_Getting_Started_Guide_
>> F
>> or_
>> PandaBoard.pdf
>>
>> I don't have PandaBoard to try out the whole procedure but I have
>> used the similar approach to port Tizen 2.0 IVI on
>> A10S-OLinuXino-MICRO and
>> A20- OLinuXino-MICRO.
>>
>> Tizen 2.0 is a very old version of Tizen. It is highly recommended
>> NOT (I would even say pointless) to use it. It is recommended to use
>> latest Tizen releases such as Tizen:Common or any of the other Tizen
>> 3 profiles.
>>
>> Best regards,
>> Leon
>>
>> On 2014-12-04 13:46, Akhil Panayamparambil wrote:
>> > Hi,
>> >
>> >  I was trying to port Tizen 2.0 to my pandaboard ES. I downloaded
>> > the Tizen images for the repo and copied it to the SD card. I
>> > already had the MLO and Uboot for the same board and the kernel I
>> > compiled from the source provided by
>> > https://wiki.tizen.org/wiki/Tizen_IVI_Getting_Started_Guide_For_Pan
>> > d aB oard [1] with Tizen Config. The boot was successful, besides
>> > some issues in resolution. I can slide unlock the menu and after
>> > that the controller gets stuck. I have checked the log in serial
>> > out. The last log says "
>> > do_calibrate: mpu: Calibration complete: Voltage Nominal…." .
>> > Please help me with this.
>> >
>> > Thanks and Regards,
>> >
>> > AKHIL P
>> >
>> > -------------------------
>> >
>> > CONFIDENTIALITY STATEMENT / DISCLAIMER : This message and any
>> > attachments is intended for the sole use of the intended recipient.
>> > It may contain confidential information. Any unauthorized use,
>> > dissemination or modification is strictly prohibited. If you are
>> > not the intended recipient, please notify the sender immediately
>> > then delete it from all your systems, and do not copy, use or print.
>> > Internet communications are not secure and it is the responsibility
>> > of the recipient to make sure that it is virus/malicious code exempt.
>> >
>> >  The company/sender cannot be responsible for any unauthorized
>> > alterations or modifications made to the contents. If you require
>> > any form of confirmation of the contents, please contact the
>> > company/sender. The company/sender is not liable for any errors or
>> > omissions in the content of this message.
>> >
>> > -------------------------
>> >
>> >
>> > Links:
>> > ------
>> > [1]
>> > https://wiki.tizen.org/wiki/Tizen_IVI_Getting_Started_Guide_For_Pan
>> > d
>> > aB
>> > oard
>> >
>> > _______________________________________________
>> > General mailing list
>> > General at lists.tizen.org
>> > https://lists.tizen.org/listinfo/general
>>
>> --
>> http://anavi.org/
>> _______________________________________________
>> General mailing list
>> General at lists.tizen.org
>> https://lists.tizen.org/listinfo/general
> ________________________________
>
> Confidentiality Statement / Disclaimer : This message and any
> attachments is intended for the sole use of the intended recipient. It
> may contain confidential information. Any unauthorized use,
> dissemination or modification is strictly prohibited. If you are not
> the intended recipient, please notify the sender immediately then
> delete it from all your systems, and do not copy, use or print.
> Internet communications are not secure and it is the responsibility of
> the recipient to make sure that it is virus/malicious code exempt.
>
> The company/sender cannot be responsible for any unauthorized
> alterations or modifications made to the contents. If you require any
> form of confirmation of the contents, please contact the
> company/sender. The company/sender is not liable for any errors or
> omissions in the content of this message.
>
> ________________________________

--
http://anavi.org/
________________________________

Confidentiality Statement / Disclaimer : This message and any attachments is intended for the sole use of the intended recipient. It may contain confidential information. Any unauthorized use, dissemination or modification is strictly prohibited. If you are not the intended recipient, please notify the sender immediately then delete it from all your systems, and do not copy, use or print. Internet communications are not secure and it is the responsibility of the recipient to make sure that it is virus/malicious code exempt.

The company/sender cannot be responsible for any unauthorized alterations or modifications made to the contents. If you require any form of confirmation of the contents, please contact the company/sender. The company/sender is not liable for any errors or omissions in the content of this message.

________________________________


More information about the General mailing list