[Tizen-submit] 8104: Changes to Tizen:IVI/kernel-x86-ivi

noreply at tizen.org noreply at tizen.org
Fri Aug 9 14:49:35 GMT 2013


Hi,
Artem Bityutskiy have made the following changes to kernel-x86-ivi in project Tizen:IVI. Please review and accept ASAP.

Thank You,

[This message was auto-generated]

---

Request: #8104

  submit:       Tizen:IVI:build/kernel-x86-ivi(cleanup) -> Tizen:IVI


Message:
Submitter: Artem Bityutskiy <artem.bityutskiy at linux.intel.com>
Comments: Make MMC drivers to be compiled-in; Sync the BayTrail GPIO driver with upstream
Git project: profile/ivi/kernel-x86-ivi
Tag: submit/tizen/20130809.144855
Commit: b9a53ca96eed2c9dba7cd0fa75a7b6a62b89c0c5 package: release out (MMC->compiled-in, update BB GPIO drv)

State:   new        2013-08-09T07:45:13 tizenrobot
Comment: <no comment>
changes files:
--------------
--- kernel-x86-ivi.changes
+++ kernel-x86-ivi.changes
@@ -0,0 +1,5 @@
+* Fri Aug  9 13:56:47 UTC 2013 Artem Bityutskiy <artem.bityutskiy at linux.intel.com> 3.10.4
+- Make SDHC controller drivers to be compiled-in in order to let people boot
+  the system off eMMC.
+- Replace the old GPIO driver with the upstream version of it.
+

spec files:
-----------
--- kernel-x86-ivi.spec
+++ kernel-x86-ivi.spec
@@ -26,8 +26,8 @@
 #%else
 #Release: %{rc_str}.%{release_ver}.0.0
 #%endif
-Release: 4
-VCS:     profile/ivi/kernel-x86-ivi#submit/tizen/20130807.131702-0-g2b529012884b0afb6f4ce09d2e219272bd413294
+Release: 5
+VCS:     profile/ivi/kernel-x86-ivi#submit/tizen/20130809.144855-0-gb9a53ca96eed2c9dba7cd0fa75a7b6a62b89c0c5
 
 BuildRequires: module-init-tools
 BuildRequires: findutils

other changes:
--------------

++++++ kernel-x86-ivi-3.10.4.tar.bz2
--- arch/x86/Kconfig
+++ arch/x86/Kconfig
@@ -471,6 +471,7 @@
 	bool "Intel Low Power Subsystem Support"
 	depends on ACPI
 	select COMMON_CLK
+	select PINCTRL
 	---help---
 	  Select to build support for Intel Low Power Subsystem such as
 	  found on Intel Lynxpoint PCH. Selecting this option enables
--- arch/x86/configs/ivi_defconfig
+++ arch/x86/configs/ivi_defconfig
@@ -477,9 +477,9 @@
 CONFIG_SPI_TOPCLIFF_PCH=y
 CONFIG_SPI_XILINX=m
 CONFIG_SPI_SPIDEV=y
+CONFIG_PINCTRL_BAYTRAIL=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_BAYTRAIL=y
 CONFIG_GPIO_PCH=y
 CONFIG_GPIO_ML_IOH=y
 CONFIG_GPIO_TIMBERDALE=y
@@ -574,12 +574,11 @@
 CONFIG_USB_SERIAL_FTDI_SIO=m
 CONFIG_USB_SERIAL_PL2303=m
 CONFIG_MMC=y
-CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_SDIO_UART=m
-CONFIG_MMC_SDHCI=m
-CONFIG_MMC_SDHCI_PCI=m
-CONFIG_MMC_SDHCI_ACPI=m
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PCI=y
+CONFIG_MMC_SDHCI_ACPI=y
 CONFIG_RTC_CLASS=y
 CONFIG_DMADEVICES=y
 CONFIG_INTEL_IOATDMA=m
--- drivers/gpio/Kconfig
+++ drivers/gpio/Kconfig
@@ -232,18 +232,6 @@
 	  blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
 	  LCD port.
 
-config GPIO_BAYTRAIL
-	bool "Intel Baytrail GPIO support"
-	depends on ACPI && X86
-	select IRQ_DOMAIN
-	help
-	  driver for memory mapped GPIO functionality on Intel Baytrail
-	  platforms. Supports 3 banks with 102, 28 and 43 gpios.
-	  Most pins are usually muxed to some other functionality by firmware,
-	  so only a small amount is available for gpio use.
-

Please refer to OBS webUI for more details about this SR.


More information about the Tizen-submit mailing list